Features:

• It can be applied as a clear, water-based varnish over matte products and decorative paints, providing a subtle sheen and a protective layer against harsh weather conditions.
• It acts as a barrier, reducing the surface absorption of plastic filler and paint, and increasing adhesion between them.
• It can be used as a sealer for interior and exterior walls to close pores, thanks to its low viscosity and small particle size, which allows the material to penetrate deep into the pores and walls.
• For Interior and Exterior Surfaces
• Clear, Water-Based (Gloss/Matte)
• Provides protection for surface paint
• Enhances the protection of exterior paints
• Rain and Dust Resistant
• Environmentally Friendly

Instructions for Use:

Surface Preparation: • Ensure the surface is clean and free of oils, grease, dust, and any other contaminants.

Application Steps: • Stir the paint well before use. • It is recommended to apply Al Waha water-based varnish after diluting it with a maximum of 1:1 water ratio using a wide brush to ensure penetration.

Suggested Painting Systems: • Apply Al Waha water-based varnish (1 coat) • Apply Al Waha putty (depending on the surface condition) • Apply Al Waha sealer or Al Waha primer (1 coat) before the final coat to increase paint adhesion and coverage rate • Finishing can be done using Al Waha Galaxy, Latex, Al Waha Exterior Paints (gloss/matte), or Al Waha Plastic.

Coverage: 10-15 m²/kg depending on the surface type.

Application Tools: Brush – Paint Roller